OBD_BleBox/BleCanBoxCode/STM32F103RCT6/HARDWARE/LED/hal_led.c

#include "hal_led.h"
#include "board.h"

void HAL_LedInit(void)
{
    GPIO_InitTypeDef GPIO_Initure;

    __HAL_RCC_GPIOB_CLK_ENABLE();
    __HAL_RCC_AFIO_CLK_ENABLE();
    __HAL_AFIO_REMAP_SWJ_NOJTAG();
    
    GPIO_Initure.Mode=GPIO_MODE_OUTPUT_PP;
    GPIO_Initure.Pull=GPIO_PULLUP;
    GPIO_Initure.Speed=GPIO_SPEED_FREQ_HIGH;

    GPIO_Initure.Pin=LED_BLUE_PIN;
    HAL_GPIO_Init(LED_BLUE_GPIO, &GPIO_Initure);
}


void HAL_LedOn(enum LED_TYPE led_type)
{
    switch (led_type)
    {
        case LED_BLUE:
            HAL_GPIO_WritePin(LED_BLUE_GPIO, LED_BLUE_PIN, GPIO_PIN_RESET);
            break;
        default:
            break;
    }
}

void HAL_LedOff(enum LED_TYPE led_type)
{
    switch (led_type)
    {
        case LED_BLUE:
            HAL_GPIO_WritePin(LED_BLUE_GPIO, LED_BLUE_PIN, GPIO_PIN_SET);
            break;
            
        default:
            break;
    }
}

void HAL_LedToggle(enum LED_TYPE led_type)
{
    switch (led_type)
    {
        case LED_BLUE:
            HAL_GPIO_TogglePin(LED_BLUE_GPIO, LED_BLUE_PIN);
            break;
        default:
            break;
    }
}